PowerMax Express

Compact, low-cost, most suitable for residential installation 28 Wireless Zones, which allows you to connect 28 Wireless detectors. One Additional Wired Zone Access from remote telephones: You may access the Alarm System from a remote telephone by dialling to your own land line number and Arm/Disarm it or receive system status information. In-built GSM Module: […]

Read more

PowerMax Complete

Supports 29/30 zones (28 wireless + 1/2 HW) Built-in PSTN communicator Two-way RF system with diversity antenna – facilitates highly reliable radio communication Supports up to 3 partitions and multiple common areas Internal PowerLink module for internet-based operation and surveillance (field-upgradeable) with connection for up to 12 cameras on-site

Read more

Wireless Magnetic Contact (MCT-302)

Magnetic contact and auxiliary input for external devices. User-selectable operation of auxiliary input as NC or EOL (end-of-line loop with NC or NO sensors). Back tamper switch detects removal from place. Superior transmission range. PowerCode™ ID factory-selected from 16 million possible combinations. Smart anti-collision mechanism supports multiple simultaneous transmissions. Long-life standard lithium battery included. Compatible […]

Read more

Wireless Motion Sensor (K9-85 MCW)

Next+ K9-85 MCW is a PowerCode wireless digital PIR detector Unprecedented capacity to reliably distinguish between human bodies and pets. fully supervised wireless detector with anti-collision PowerCode technology. Compatible with PowerMax and all Visonic PowerCode wireless panels and receivers. 10-15m (40 ft) 90 Degree multiple-curtain coverage with creep zone. 3 Volt long life high power […]

Read more

Wireless Curtain PIR (Clip MCW)

Clip MCW is designed for the protection of doors, windows and all-glass walls. Full Compatibility with members of the PowerMax family and all Visonic PowerCode wireless panels and receivers. Clip MCW provides full perimeter protection while allowing consumers to normally and freely use the premises without triggering a false alarm. Clip MCW uses algorithm to […]

Read more

Wireless Ceiling PIR (DISC MCW)

Disc MCW is a ceiling mount PIR detector that combines state-of-the-art optic design with advanced detection algorithms The Disc MCW detector’s miniature size is easily installed on any ceiling up to 3.6m (12ft) high and provides floor coverage of up to 11m (36ft). Disc MCW Features: Provides 360degree detection reliability, with minimum false alarms Wireless […]

Read more

Keyfob (MCT 234)

Four independent functional buttons. Comfortable miniature attractive design. Superior transmission range. CodeSecure™ encryption technology prevents unauthorized “code grabbing”. CodeSecure™ ID selected from over 100 million possible code combinations. Standard Alkaline battery. Visible and transmitted low battery indication.

Read more

Wireless Panic Button (MCT 201)

Transmission is activated by depressing the recessed push button at the center of the unit. When activated, each transmitter sends out a 24-bit ID code and an alarm code, identifiable by compatible wireless receivers of the MCR family. PowerCode™ ID factory-selected from 16 million possible combinations. Operating power is obtained from an internal 12-volt alkaline […]

Read more

Wireless Outdoor Motion Sensor (Tower-20AM MCQ)

Superior outdoor detection with virtually no false alarms. It is the first detector to prevent false alarms caused by outdoor interference, such as rain, snow, lightning storms, swaying bushes and free-roaming animals, while still providing reliable detection of real threats. Adaptive, active IR provides complete anti-masking protection (patented). 12m x 12m (40ft x 40ft) / […]

Read more

Wireless Panic Button (MCT 220)

MCT-220 is a wireless personal emergency button that provides an ideal solution for people who need to raise emergency alarm calls when they are not close to the control panel. MCT-220 has several design features that make it visible at all times. It has a large red button that when pressed, activates the red LED […]

Read more

Wireless Smoke Detector (MCT-426)

MCT-426 Superior detection sensitivity. Sound and transmitted alerts (smoke, tamper, low battery). Fully supervised. PowerCode™ technology with anti-collision transmission algorithm. 9 Volt alkaline battery. Simple ceiling-mount installation with no mess. Easy programming and user-friendly control. Attractive modern design suitable for residential applications. Compatible with PowerMax™ and other Visonic PowerCode™ wireless systems

Read more

Wireless Outdoor Sounder (MCS-730)

Wireless connection between control panel and siren Battery operation with no additional power supply required (battery life up to 3 years) Double plastic cover for extra protection against harsh external conditions (IP55) Audible and visual arming and disarming notifications Fully-supervised two-way communication for local and remote diagnostics Status, tamper, low battery and supervision reports to […]

Read more

Repeater (MCX-610)

MCX-610 extends the communication range between the PowerMax® systems and other PowerCode™ transmitter, including one-way and two-way keyfobs, remote commander and PowerCode motion detectors MCX-610 repeater uses a unique, factory programmed, randomly selected 24-bit digital alarm ID code during each transmission. This code is selected from 16 million possible code combinations MCX-610 USES the unique […]

Read more

GSM Module (GSM 350)

Supports three data channels – GPRS*, GSM and SMS – for high-speed and highly-reliable reporting. Can be configured as a backup or primary reporting method. Full event reporting. Supports remote programming of the security system via the IPMP Management Platform or via dial-up over the GSM data channel. Continuous monitoring of channel integrity and “signal […]

Read more